ASTM B209/B209M

Aluminum Coil

Source aluminum coil by alloy and temper with thickness, width, coil ID, weight, finish, slitting, flatness, certificate, and seaworthy export packing confirmed before order.

Request a Quote WhatsApp Contact Technical Sales

PRODUCT SPECIFICATIONS

KEY SPECIFICATIONS

Material: Aluminum
Grade: Exact grade under the governing standard; confirm on quotation/PO.
Temper: Exact temper under the governing standard; confirm on quotation/PO.
Standard: ASTM B209/B209M
Dimensions: Complete nominal dimensions, tolerances, and product form; confirm on drawing/PO.
Product: Aluminum Coil

Technical classification

Material / substrate: Aluminum
Form: Coil

Product specifications

Send grade, standard, dimensions, and delivery requirements for a matched product quotation.

Product specifications
Property	Value
Product identity
Product	Aluminum Coil
Material	Aluminum
Grade	Exact grade under the governing standard; confirm on quotation/PO.
Product form	Coil
Standards and classification
Standard	ASTM B209/B209M
Dimensions
Dimensions	Complete nominal dimensions, tolerances, and product form; confirm on drawing/PO.
Supply condition
Temper	Exact temper under the governing standard; confirm on quotation/PO.

Overview

Aluminum coil is supplied for roofing, insulation, heat exchangers, transport, stamping, cladding, and general fabrication in alloy families selected for the required forming, strength, corrosion, and surface performance. Buyers should state alloy and temper, base-metal thickness, width, coil ID and weight limits, edge, surface finish, flatness, and any coating or protective film. Send the complete order designation, dimensions, quantity, inspection requirements, packing method, and destination port. The quotation can then address availability, production timing, EN 10204 3.1 documentation, inspection options, export packing, and delivery terms for the requested specification. Aluminum Coil is selected for purchasing programs that need a clearly defined Coil, material identity, and order specification. Buyers normally specify 1050, 1060, 3003, 5052, ASTM B209, GB/T, dimensions, tolerances, surface or delivery condition, and any downstream processing. Typical order contexts include Roofing, cladding, and insulation jacketing, Stamping and formed transport or appliance parts,…

Product scope

Grade and standard are selected from the project specification; cross-standard equivalence is not assumed.
Coil dimensions, surface, processing, inspection, and documents are confirmed from the RFQ.

Applications

Roofing, cladding, and insulation jacketing
Stamping and formed transport or appliance parts
Heat-exchanger fins and general industrial fabrication

Surface options

Mill finish
Anodized or conversion-treated by specification
Color-coated or protective-film surface by approved sample

Processing & form

Precision slitting
Cut-to-length sheet
Tension leveling
Coating, embossing, or protective film as ordered

Packing, inspection & delivery documents

Include packing, material certificate and inspection requirements so costs and delivery arrangements can be reviewed together.

Packing & delivery

Export packing options

Aluminum is packed to limit moisture, staining, edge damage, and metal-to-metal abrasion. Depending on form, the export pack can use waterproof film, interleaving paper, edge boards, strapped skids, wooden cases, coil eye protection, or capped bundles. Unit weight, lifting method, container limits, protective-film requirement, destination climate, port, and discharge equipment are confirmed before loading.

Quality assurance

Quality documents

Inspection follows the accepted alloy, temper, dimensions, tolerances, surface condition, and applicable product standard. The agreed scope can include dimensional checks, visual surface review, mechanical-property documentation, alloy verification, coating or anodizing checks, and lot traceability. Certificate type and any third-party witness or laboratory requirement must be stated before production or stock allocation.

Export packing & loading evidence

Representative export packing and loading evidence. Final packing follows the approved order.

Order planning

Storage, inspection and application requirements

Include quantity, destination, handling and inspection requirements in your inquiry.

Storage and handling

Specify batch identification, surface protection, storage and unloading requirements. Availability and shipment terms are confirmed in the quotation.

Supply information Discuss availability and delivery

Thickness measurement and specification review

Inspection requirements

Include the certificate, heat identification and checks required by your order. Request third-party inspection or a visit for confirmation of scope and arrangements.

Quality and standards Discuss inspection

Application requirements

Specify end use, environment and processing requirements so the material can be reviewed against your project. Roofing, cladding, and insulation jacketing; Stamping and formed transport or appliance parts; Heat-exchanger fins and general industrial fabrication

View applications Quote for this application

FAQ

What should an RFQ for Aluminum Coil include?

State alloy, temper, thickness, width, coil ID and weight, edge, finish or coating, tolerances, quantity, packing, and port. A complete line-item specification is required before manufacturing route, availability, inspection, and packing can be confirmed.

What quality documents are available for Aluminum Coil?

The ordered document pack can include mill certificates, lot or heat identity, dimensional and visual inspection records, and product-specific test reports. Third-party inspection must be agreed before production or stock allocation.

How is Aluminum Coil packed for export?

Packing is selected from the product form, unit weight, handling method, destination climate, container or break-bulk limits, and discharge plan. Confirm the destination port and any storage constraints on the RFQ.

What information is needed to quote Aluminum Coil?

Send the required grade or standard, dimensions, quantity, destination port and application. Add surface, processing, packing or inspection requirements when they affect the order.

How should I select the grade or standard for Aluminum Coil?

Use the project specification and end use as the starting point. Share any required reference such as 1050, 1060, 3003, 5052, together with forming, welding, corrosion or service conditions, so the quotation follows the intended application.

What affects the quotation for Aluminum Coil?

The material specification, dimensions, quantity, processing, surface, packing and destination all affect the quotation. Final commercial terms are provided against the submitted RFQ.