DX52D
PPGL DX52D Pre-Painted Galvalume Coil
Thickness about 0.3–1.2 mm typical for roofing lines;… · Coil
Products
Products in this family
Source GI, GL, PPGI/PPGL, and roofing sheet for forming, cladding, and outdoor export programs. Start with the GI coil and PPGI product landing pages for high-intent RFQs, or open flagship PDPs (DX51D GI coil, hot-dip GI family, galvalume, color-coated hub, corrugated roofing, DC01 sheet). Confirm base grade, zinc or AZ coating mass, paint system and RAL when pre-painted, thickness x width, surface package, and seaworthy packing before quotation.
Quick filters
Common grades
Common standards
Recommended for RFQ
Commercially important products with complete specifications and RFQ guidance.
Quick quote details
Confirm these points before inquiry so the quotation can be practical and specific.
- State base grade and coating mass (for example DX51D+Z, Z120/Z275, or AZ150 class).
- For color coat, lock RAL or sample, paint system (PE/SMP/HDP/PVDF), and film needs.
- Confirm thickness, width, coil ID/weight or sheet length, packing, and destination port.
- Use /en/lp/galvanized-steel-coil/ or /en/lp/ppgi-coil/ for Ads-ready RFQ paths on the galvanized site.
DX51D
Galvanized Steel Strip (GI Slit Coil) Z40–Z275
Z40–Z275 · 0.11–5.0 mm (confirm RFQ range) · Strip
Showing 39 of 39 products
Buyer path
Compare, specify, then quote
Keep the grade in its governing standard. Use these procurement resources to confirm dimensions, quantity, inspection scope and destination.
Required RFQ fields
- grade and governing standard
- dimensions and tolerance basis
- quantity
- destination port
- MTC and inspection scope
- packing requirements
- substrate and Z / AZ coating class
- surface treatment or paint system
Product family comparison
Compare approved Galvanized & Coated Steel Coils, Sheets and Roofing specifications
This table uses technically approved specification records only. An empty cell means no public value has been approved yet.
| Product | Substrate |
|---|---|
| DC01 Galvanized Steel SheetView product | carbon-steel |
| DX51D Galvanized StripView product | carbon-steel |
| PPGL DX52D Pre-Painted Galvalume CoilView product | carbon-steel |
| Q195 Galvanized CoilView product | carbon-steel |
| DC01 Galvanized CoilView product | carbon-steel |
| DX52D+Z Forming-Grade Galvanized Steel CoilView product | carbon-steel |
| DX51D+Z Galvanized Steel CoilView product | carbon-steel |
| G550 High-Strength Galvanized Steel CoilView product | carbon-steel |
| ST12 Galvanized Steel CoilView product | carbon-steel |
| DX51D+Z Galvanized Steel SheetView product | carbon-steel |
| DX52D+Z Forming-Grade Galvanized Steel SheetView product | carbon-steel |
| Electro-Galvanized Steel Coil / Sheet (EG)View product | carbon-steel |
Grades, standards, applications
Grades, standards, applications
SPECIFICATION REGISTRY MATRIX v1.2 SYSTEM STATUS: ACTIVE
Common grades
State coating mass (e.g. Z80–Z275) and paint system for color coil separately from base grade.
- Coated Steel
- Flat Carbon Steel
- Structural Carbon Steel
- Alloy Steel
Common standards
- EN 10346
- JIS G3312
- EN 10130
- EN 10130 (BASE DC01 CLASS)
- EN 10346 /
- ASTM A653 COATING PRACTICE AS AGREED
- JIS G3141
- JIS G 3302
- GB/T 699
- GB/T 342
- ASTM A792
- ASTM A653 COMMERCIAL GI PRACTICE WHEN AGREED
Typical applications
- Roofing and wall cladding
- HVAC ducts and light forming
- Appliance panels and cabinets
- Purlin and profile lines
- Outdoor enclosures and export fabrication
Size & dimension range
- GI/GL/PPGI thickness about 0.12–3.0 mm; width about 600–1,500 mm.
- State zinc or Al-Zn coating mass (e.g. Z80–Z275) and coil weight.
- For color coil: RAL/paint system separate from substrate grade.
- Confirm film, spangle, and oiling when controlled.
Category FAQ
Category FAQ
What does coating weight mean for buyers?
It is the zinc mass per area that drives corrosion life. Write the target coating in the RFQ and verify it against project climate and warranty rules.
DX51D vs DC01 for galvanized coil?
DX51D is common for forming and construction profiles; DC01 is often reviewed for thinner precision sheet work. Match the base grade to the process, not only price.
How should PPGL be specified?
Include base metal, coating, paint system, color, thickness, and width. Attach a color chip or RAL/code when appearance is contractual.
What packing protects galvanized coils at sea?
Typical export packs use strapping, edge protection, VCI or film, and moisture control suited to the route. Confirm stack and coil weight limits for the port.
Product center
Switch to Other Steel Families
Navigate to other metallurgical groups for cross-reference pre-qualification.
Request a Quote
Choose Galvanized & Coated Steel Coils, Sheets and Roofing for your application
Send the grade, dimensions, quantity and destination port. We will match the product and prepare a specific quotation.