DC01 Galvanized Coil

Confirm DC01 or equivalent base grade, zinc coating mass, thickness and width, surface (spangle, oil, or passivation), coil weight limits, quantity, destination port, packing method, and whether EN 10204 3.1 MTC or third-party inspection is required.

DC01 is commonly used as a commercial forming grade for panels, cabinets, and blanking. If your part needs deeper draw performance, share drawings or forming severity so we can advise whether DC01 is adequate or a deeper-drawing base should be reviewed.

We can coordinate mill test certificates (typically EN 10204 3.1), packing lists, commercial invoice support, coil or heat identification, loading photos, and optional SGS, BV, or Intertek inspection before shipment.

Send the required grade or standard, dimensions, quantity, destination port and application. Add surface, processing, packing or inspection requirements when they affect the order.

Use the project specification and end use as the starting point. Share any required reference such as DC01, EN 10130, EN 10346, together with forming, welding, corrosion or service conditions, so the quotation follows the intended application.

The material specification, dimensions, quantity, processing, surface, packing and destination all affect the quotation. Final commercial terms are provided against the submitted RFQ.