Steel sourcing & export
ASTM A36 Steel Plate Export from China
Source ASTM A36 plate from China with a per-size plate schedule, the ordered standard edition, inspection scope and heat-linked documents. Confirm edge condition, packing and destination port before production release.
- A36 / equivalent structural plate inquiries for stock or project cuts
- Export document pack: commercial invoice, packing list, MTC by heat/batch as ordered
- Port corridor references: Qingdao / Tianjin for FOB planning; CFR/CIF after freight inputs
Specification & process notes
| Item | Detail for RFQ |
|---|---|
| Standard / grade | ASTM A36/A36M and the ordered edition; dual certification requires documented compliance with both standards, not a grade-name substitution |
| Common forms | Plate / sheet as ordered; cut-to-length when confirmed |
| Dimensions | List thickness, width, length, piece count or weight for each size; agree dimensional and flatness tolerances before comparing offers |
| Surface / edges | Specify as-rolled or other agreed surface, mill or cut edges, and any cutting allowance |
| Testing | Chemical and mechanical tests follow the ordered A36/A36M requirements. Additional UT or impact testing needs a separately agreed method, acceptance criteria and reporting scope in the PO/ITP |
| Documents | EN 10204 3.1 MTC by heat/batch as ordered; CO and third-party inspection on request |
How we work this inquiry
- Share project or stock use so thickness range and flatness expectations can be checked.
- Heat-number marking on plates/bundles can be coordinated for dispatch traceability.
- Loading photos and shipping marks can be provided for the contracted lot when required.
FAQ
Can you export ASTM A36 plate from China with mill documents?
Yes. Export RFQs can be reviewed when size, quantity, port, and document needs are clear. Shipment lots can include EN 10204 3.1 MTC by heat/batch as ordered.
What thickness range should I put on the RFQ?
List the exact thickness, width, length, and tolerance class you need. Do not rely on generic “common range” claims — mill release follows the confirmed PO.
Do you support third-party inspection before loading?
Buyer-nominated or common third-party inspectors (e.g. SGS, BV, TÜV) can be coordinated against an agreed ITP. Scope must be stated before production release.
Related products & links
Specs needed for a quote
Request a Quote — include these details
Complete specifications help us quote accurately. Send at least the grade and standard, size, quantity and destination port so we can include the relevant MTC and packing requirements.